Apacer industrial SSDs, DRAM modules and memory cards address controlled-lifecycle storage and memory requirements with fixed-BOM, wide-temperature, power-loss, security and firmware-customization options on selected families. Cervoz embedded flash and modular expansion cards provide compact board-level storage and M.2 or Mini PCIe I/O for embedded computers.
Five product groups cover fixed storage, system memory, removable media, compact boot devices and embedded I/O expansion.
Apacer PCIe/NVMe and SATA SSDs for fixed boot, application and high-rate data storage, with product-specific power protection, security, ruggedization and lifecycle-management options.
Apacer DDR5, DDR4 and legacy DRAM modules in standard, ECC, VLP and rugged formats, with product-specific wide-temperature and environmental-protection options.
Cervoz M.2 2230/2242/2280, mSATA, Half Size mSATA, HalfSlim and SATA/PATA disk modules for compact boot, application and local-data storage.
Apacer industrial SD, microSD, CompactFlash, CFast and CFexpress Type B media for logging, imaging, software distribution and service workflows.
Cervoz M.2 and Mini PCIe modules for Ethernet, Wi-Fi/Bluetooth, serial, CAN/CAN FD, USB, display and SATA expansion in compact embedded computers.
A structured way to match memory, storage and embedded I/O to the host platform, workload, operating environment and product lifecycle.
Choose NVMe, SATA, PATA, embedded flash or removable media according to the available interface, form factor and boot architecture.
Select DRAM generation, module type, capacity and ECC architecture from the processor and motherboard requirements.
Review sustained writes, endurance, power interruption, temperature, shock and vibration before fixing the device family.
Add storage or communication functions through supported modules while retaining the existing embedded-computer platform.
The product range combines Apacer industrial storage and memory with Cervoz board-level embedded flash and compact I/O expansion.
Industrial SSDs, DRAM modules and removable media with fixed-BOM support, PCN/EOL processes and product-specific power-protection, security, ruggedization, wide-temperature and firmware options.
Compact M.2 2230/2242/2280, mSATA, Half Size mSATA, HalfSlim and SATA/PATA disk modules, together with M.2 and Mini PCIe cards for Ethernet, Wi-Fi/Bluetooth, serial, CAN/CAN FD, USB, display and SATA connectivity.
The available portfolio supports embedded systems where endurance, environmental operation, interface continuity and revision control must be planned from the start.
Provide qualified boot, application and data storage together with compatible system memory for box PCs, panel PCs and automation controllers. Expansion cards add interfaces without changing the base computer.
Support onboard logging, diagnostics and communication under temperature cycling and vibration. Wide-temperature storage, retention hardware and CAN or Ethernet expansion are common requirements.
Maintain controlled memory and storage configurations through long development and qualification cycles. Removable media, fixed flash and isolated expansion can be selected around the equipment workflow.
Combine high-throughput NVMe storage, adequate DRAM capacity and additional camera or network interfaces for image capture and local inference. Sustained performance and thermal design matter more than burst specifications.
Record continuous measurement streams, transfer data using removable media and retain configuration files on compact embedded storage. Endurance and power-loss recovery should match the acquisition process.
Extend systems built around PATA, CompactFlash, older DDR generations or serial interfaces. Compatible industrial components can delay a costly complete controller redesign.